Table of Contents
Advertisement
SLEEP button
BLOW button
LIGHT button
LEFT AND RIGHT
SWING button
under auto, dehumidify or fan mode, and characters of turbo won't
appear.
Press this button, enter into SLEEP state, when repressed, it will quit.
The sleep function will be canceled with the stop of the unit. There is
no SLEEP function under AUTO and FAN mode.
for sleep function.
At COOL mode: the SLEEP mode runs after 1hour, the setting temp.
will be increased by 1
increased by 2
and then will run at this setting temperature.
℃
At HEAT mode: the SLEEP mode runs after 1hour，the setting temp
will be decreased by 1 ,2 hours later setting temp, will be
by 2 ,then it will r
℃
un at setting temperature
Set Blow on (the characters of Blow will appear)or off (the
characters of Blow disappears) by pressing this key under cool or
dehumidify mode. Once energized, the unit will be defaulted to be
Blow off. This function can not be set under auto, fan or heat mode,
and the characters of Blow won't appear.
Press this button to select LIGHT on or off in the displayer. When
the LIGHT on is set, the icon
indicator light in the displayer will be on. When the LIGHT off is
set, the icon
will be displayed and the indicator light in the
displayer will be off.
Swing mode is defaulted for wireless remote control, in which mode,
press this button
, could turn on or turn off the Left and right
swing function
When unit is turned off, synchronously press "+" and Left and right
swing buttons, it could be switched between the swing mode and
stationary swing mode, at this time,
In Stationary swing mode, press this button, the angle for Left and
right swing as show in below:
When left and right swing louver is working, when turn off the unit,
the swing louver will immediately stop at current position.
shows left and right swing louver swings back and forth as show in
the above figure.
13
℃
, 2 hour later, setting temp. will be
℃
will be displayed and the
blinks 2 seconds.
is the icon
decreased
Advertisement
Table of Contents
