Uncrating - True TUR-24-R/L-SS-A Installation Manual

UNCRATING

Tools Required:
• Cutting utensil (utility knife)
• Hammer
• Crowbar
• Phillips head screwdriver
The following procedure is recommended for
uncrating the unit:
MOvE yOUR UNIT AS CLOSE TO THE FINAL
LOCATION AS POSSIBLE BEFORE REMOvING
THE wOODEn SKID.
A. Remove nails securing cardboard box to the
wooden skid. Then discard any outer packaging
(cardboard, clear plastic).
A
C
2 True Professional 24 Series Installation Guide
Inspect for concealed damage. Again, immediately file
a claim with the freight carrier if there is damage.
B. IMPORTANT: Remove wooden block with Phillips
head screw driver before removing refrigerator
from pallet.
C. Remove skid by carefully lifting the refrigerator off
and place skid aside. Remove clear plastic
coating from cabinet.
D. Open the unit and remove any packing material.
Styrofoam, tape, and any other material used
for shipping purposes.
nOTE: KEyS FOr UnIT arE PrOvIDED wITH
THIS PaCKET
B
D