Installing Anti-Tip Brackets - True TUR-24-R/L-SS-A Installation Manual

INSTALLING ANTI-TIP BRACKETS

aLL FrEE STanDIng, DrawEr Or STaCKED UnITS mUST HavE
THE anTI-TIP BraCKETS InSTaLLED.
TIP OvER HAZARD: A CHILD OR ADULT CAN TIP THE REFRIGERATOR
AND MAy CAUSE PROPERTy OR BODILy HARM.
To prevent this the anti-tip brackets need to be installed.
Reconnect the anti-tip bracket if the product is moved.
Failure to follow these instructions can result in property
or bodily harm.
Read all installation instructions first. Install the anti-tip
brackets to hold both rear legs of the unit. Follow these
steps to secure the brackets to the floor before moving
the unit into final operating position.
Contact a qualified floor covering installer for the best
procedure of drilling mounting holes through your type
of floor covering.
BEFOrE mOvIng UnIT TaKE PrECaUTIOnS TO
PROTECT THE FLOOR COvERING.
Overlay Panel
1/2
25/32
" 20
22
1/32
22 "
ANTI-TIP BRACKET LOCATOR - TOP VIEW
A
27/32"
Back of the unit
3/16
22 "
"
Cabinet Front
B
A. Determine the location of the unit. From the front
of the determined location of the lower louver grill
measure back 20 1/2 ". From the determined side of
the unit measure over 27/32".This is where the back
and outer side of the bracket should sit. Using the
bracket as a template mark the holes for drilling.
B. To mount the anti-tip bracket to wood floor, drill
pilot holes for each of the bracket holes. To mount
the anti-tip bracket to concrete or ceramic floor
use a masonry bit to drill pilot holes. Align anti-tip
bracket holes with the holes in the floor. Fasten anti-
tip bracket with screws provided using the brass
colored screw for wood, or blue colored masonry
screw for concrete.
C. Move unit into final position making sure rear leveling
legs slide into the anti-tip brackets.
27/32"
True Professional 24 Series Installation Guide
C
5