Vector; Power Metrics; Getting Started; Installing The Vector Components - Garmin EDGE 510 Quick Manual

7 Vector

vector is compatible with eDGe
Power metrics that vector records
vector measures pedal-based power.
vector measures the force you apply a few hundred times every second. vector also measures your cadence
or rotational pedaling speed. By measuring the force, the direction of force, the rotation of the crank arm,
and time, vector can determine power (watts). Because vector independently measures left and right leg
power, it reports your left-right power balance.
NOTE
The Vector S system does
not provide left-right power
balance.

Getting started

1. install the vector components (installing the vector components).
2. install the shoe cleats (installing the shoe cleats).
3. Pair vector with your eDGe
4. Go for a ride (your first ride).
5. view your history (vector Data).
6. send your history to your computer (sending your ride to Garmin connect).

installing the vector components

the installation steps for the vector and vector s systems are very similar. Procedures that are specific to
the vector s system are noted.
tools needed
– 15 mm pedal wrench
– Bike grease
– 3 mm hex key
– 4 mm hex key
preparing the crank arms
1. confirm the compatibility of your bike at www.garmin.com/vectorowner
2. remove the existing pedals.
3. clean the threads, and remove old grease.
48
cHaPter 7: vector
500/510/810/1000.
®
TIP
For software updates, video tutorials, and everything
you need to get years of service out of your Vector, go to
www.garmin.com/vectorowner
(Paring vector with your eDGe
®
1000).
®