Auto Lap - Garmin EDGE 510 Quick Manual

auto lap

the auto lap feature automatically marks a lap at every kilometer, and you can mark laps manually for
comparing performance over longer runs for a one kilometer segment.
1.
1. on activity profiles, select
auto features (edge 1000
only), then select the profile
required.
4.
4. select lap at.
cHaPter 5: Profiles
2.
2. scroll down to select auto
lap.
5.
5. select an option:
3.
3. select By position.
– select lap press only to
trigger the lap counter each trigger the lap counter each
time you select time you select
time you pass any of those
locations again.
– select start and lap to trig-
ger the lap counter at the GPs ger the lap counter at the GPs
location where you select location where you select
and at any location during the and at any location during the
ride where you select ride where you select
– select mark and lap to
trigger the lap counter at a
specific GPs location marked
before the ride and at any
location during the ride where location during the ride where
you select you select .
and each
.
37