Operating In System Mode; Starting System Mode - Denso BHT-300QW User Manual

2.5 Operating in System Mode

System Mode is an operating software exclusively designed for the effective use of the BHT, which
includes various functions as shown on the following pages.

2.5.1 Starting System Mode

To start up System Mode, turn the BHT on while holding down the SF and 1 keys. This operation calls up
the SYSTEM MENU on the LCD as shown below.
The function selected is highlighted (white-on-black) with the cursor. To select a desired item in System
Mode, press the corresponding numerical key and then press the ENT key.
The keys below are so designed that the function of each key is consistent in every screen.
Numerical keys
ENT key
F5 and F6 keys
F7 and F8 keys
The C key is disabled on the SYSTEM MENU. On other screens, pressing the C key returns to the
immediately preceding screen.
The power-on default on the SYSTEM MENU is "EXECUTE PROGRAM" which is highlighted. Once any
other item is selected, the selected item will become highlighted with the cursor when you turn back to
the SYSTEM MENU.
Pressing a numerical key corresponding with a desired menu
number selects the desired item displayed on the screen.
Pressing this key registers the selected item and executes the
corresponding function.
Pressing the F5 and F6 keys moves the cursor up and down,
respectively, to select a desired item.
Pressing the F7 and F8 keys moves the cursor to the left and right,
respectively, to select a desired setting.
39
Chapter 2 Getting Started the BHT and System Mode