Canon MultiPASS C5000 Service Manual page 78

Part 1: Facsimile
NOTE
Paper feed error detection
There are three types of paper feed ermr which may occur:
a) No paper error
Occurs when the Paper Edge Sensor does not detecl the paper's leading edge
the start of the paper picked up operation is executed, it is executed again. If
the paper is still not sensed , it is assessed as a No paper error.
b) Eject delay jam
Occurs when the Paper Edge Sensor dots not detect the paper's trailing edge
after the page has been printed, or after 22 inches (568.8 mm) of paper eject
operation has been performed.
c) Paper size error
When the size of the paper being fed is different from that registered in the
user data, and the page being printed is divided during printing, a paper size
error will occur.
When a paper feed error occurs, memory reception begins from the page at
which the paper feed error occurred.
When copying, the data are erased from memory as soon RS an error occurs.
2-10