Additional Forwarding Types - Siemens OpenStage 30 T User Manual

Step by Step
Destinations?
Call forwarding?
Next forwarding type?
FWD-VAR-RNA-BOTH off
Enter destination:
Save?
Ringing duration until forwarding
Modify?
Save?

Additional forwarding types

This description applies for the following forwarding
types:
• Forwarding for intnl
• Forwarding for extnl
• Forwarding on busy
• Call forward. no reply
• Forwarding on busy/no reply
Programming a forwarding destination activates call for-
warding. If call forwarding is deactivated, the forwarding
destination is deleted at the same time.
Configuring and activating call forwarding
N
Open the Program/Service menu
Confirm the option shown.
Confirm the option shown.
Variable call forwarding is offered first.
Confirm until the required forwarding type
shown in the first line.
Example of "Call forward. no reply"
Forwarding type with status.
Select and confirm the option shown.
j
Enter the call forwarding destination number.
Confirm, when the phone number is complete. The sta-
tus is set to "FWD-VAR-RNA-BOTH on".
Select and confirm the option shown if you want to
change the 0 seconds preference.
Confirm the option shown.
j
Enter the time in seconds after which the call should be
forwarded. You can enter a maximum of 60 seconds. If
the value is, the system forwarding time is used . The
time set here is also used by the "Forwarding on busy/
no reply" forwarding type.
Confirm the option shown.
Basic functions
page 22.
page 31 is
35