Additional Forwarding Types - Siemens HiPath 4000 User Manual

Basic functions
Step by Step
Destinations?
Call forwarding?
Next forwarding type?
FWD-VAR-ALL-INT off
Enter destination:
Save?
Deact call forwarding?
28

Additional forwarding types

This description applies for the following forwarding
types:
• Forwarding for intnl
• Forwarding for extnl
• Forwarding on busy
• Call forward. no reply
• Forwarding on busy/after timeout
Programming a forwarding destination activates call for-
warding. If call forwarding is deactivated, the forwarding
destination is deleted at the same time.
Configuring and activating call forwarding
N
Open the Program/Service menu
f
Confirm the option shown.
f
Confirm the option shown.
Variable call forwarding is offered first.
f
Confirm until the required forwarding type
shown in the first line.
Example:
Forwarding type with status.
f
Select and confirm the option shown.
j
Enter the call forwarding destination number.
f
Confirm, when the phone number is complete.
Deactivating variable call forwarding
For "Call forwarding for internal" and "Call forwarding for
external":
r
Press the lit key. The LED goes out.
For all other forwarding types:
$
Open the idle menu
f
Select and confirm the option shown.
Call forwarding is deactivated and the destination num-
ber is deleted.
Call forwarding can also be preconfigured in the
system
page 16.
page 13.
page 50.
page 24 is