Set Up A Wireless Network - ZyXEL Communications P-2612HNU(L)-FxF Quick Start Manual


If no lights are on, check your connections. Make sure that
you have the power adaptor connected to the P-
2612HNU(L)-FxF and plugged in to an appropriate power
source. Make sure the power source is turned on. Turn the
P-2612HNU(L)-FxF off, wait for a few seconds and turn it
back on. If the LEDs are still off, contact your local vendor.

If the INTERNET light is green but the PHONE light is off,
see the Tutorials and VoIP chapters in your User's Guide for
how to use the VoIP screens to set up your VoIP account.

If the PHONE light is on, see
to see how to make calls through the Internet.

If the WAN light is on but the INTERNET light is off, see the
Tutorials and Broadband chapters in your User's Guide for
how to use the Network Setting > Broadband screen to set
up the WAN connection.

If you want to have the P-2612HNU(L)-FxF use 3G as your
WAN or as a backup when the Ethernet WAN connection
fails, see your User's Guide for how to use the Network
Setting > Broadband > 3G Backup screen to set up the 3G
WAN connection.

Set Up a Wireless Network

To set up a wireless network you need at least one wireless network
card/adapter.
• If you have a desktop computer, use either a wireless USB adapter
or a wireless PCI adapter.
• If you have a laptop, use either a wireless USB adapter or a
wireless CardBus card. These are built into many laptops.
Make Phone Calls on page 13
7