Table of Contents
Advertisement
Replace drum unit
As soon as the "DRUM OPERATING TIME" warning lamp (see
should ensure that a new drum unit is near to hand. The "DRUM LIFE WARNING" message in the display
indicates that the fax machine will only print out a further approx. 300 documents (depending on the print
density). If you fail to change the drum in this period, the "REPLACE DRUM" message appears in the display;
this indicates that the fax machine will not print out any more documents. If the drum unit is not replaced,
incoming fax documents are saved in memory.
1. Pull the release button to open
the fax machine.
2. Hold the green handles and
remove the printer unit.
Connecting your fax machine
Telephone conne ction
Connect your fax machine (LINE jack) to the telephone socket, as shown on the right.
page
3. Remove the drum unit from the
developer assembly.
• Do not touch the developer roller
(the black roller with a toner
coating).
4. Take the new drum unit and
insert it into the developer
assembly as detailed in the
drawing.
Mains power connection
5) lights up on your fax machine, you
• Any damage to the printer
drum will impair the image
quality. You must therefore
never touch the green drum
surface or expose the drum to
direct sunlight for more than
three minutes.
5. Now proceed as described on
page 7
(the fixing roller cleaner
is not replaced).
Consumables are taken
back and recycled by your
TOSHIBA dealer.
9
ON/OFF
switch
Advertisement
Table of Contents
