Table of Contents
Advertisement
Basic setting, send after scan
The default setting for the fax machine causes the fax machine to commence dialling immediately after
pressing the START button for a scan job. In the case of extensive fax jobs, this can result in the page number
descriptor in the TX header on the first few pages being incomplete. This in turn results in a memory overflow,
the transmission is interrupted and the document part waiting in memory is deleted. This prevents the
document feed becoming jammed.
If extensive fax jobs are sent on a frequent basis, the basic setting should be changed accordingly so that the
transmission does not commence until the document has been scanned completely. Furthermore, the way in
which the fax machine is to handle a memory overflow can also be set.
. . . . .
. . . . .
STOP
15-MAR-00 WED 19:56
RESIDUAL MEMORY 100%
1.COMM. OPTIONS
2.LISTS
3.INITIAL SETUP
4.DEFAULT SETTINGS
SEND AFTER SCAN
1.DIAL DURING SCAN
2.DIAL AFTER SCAN
WHEN MEMORY FULL
1.DELETE SCAN PAGES
2.SEND SCAN PAGES
Standby mode
Start the menu
The first 4 menu items are displayed.
Select a menu item
Make your selection for SEND AFTER SCAN
1. Send during scanning
2. Send after scanning
Select a menu item
In the case of selection 2 (behaviour in the
event of a memory overflow)
1. Cancel sending (document feed ready for
use)
2. Continue sending (documents remain in
the document feed until the memory is
free)
Select a menu item
Press STOP , return to standby mode
131
Advertisement
Table of Contents
