Restoring The Default Settings - Gigaset C285 Manual

Restoring the default settings

Settings for connecting the base
station to the PABX
The following settings are only needed
when your PABX requires them. Please refer
to the user guide of your PABX.
Changing the dialing mode
The following dialing modes can be
selected:
u
Tone dialing (DTMF)
u
Pulse dialing (DP)
¢ ¢
§Menu§
Settings
¢ ¢
Dialing Mode
Tone / Pulse
Select the dialing mode and
§OK§
press
Setting the flash time
¢ ¢
§Menu§
Settings
¢
Duration Line 1 / Line 2
Short / Long
Select the flash time (Short =
80 ms, Long = 650 ms) and
§OK§
press
Switching temporarily to tone dialing
(DTMF)
If your PABX still operates with pulse dialing
(DP), but you need tone dialing (DTMF) for a
connection (for example to listen to the
voice mailbox), you must switch to tone dial-
ing for the call.
Requirement: You are conducting a call or
have already dialed an external number.
¢
§Menu§
Tone Dialing
§OK§
Press the display key to confirm.
Tone dialing is now activated for this call
only.
32
System
Line 1 / Line 2
.
¢
System Flash
.
Restoring the default
settings
You can restore the default values for most
settings. When resetting, all handsets
remain registered and the directory will not
be deleted.
¤
Perform the following on a registered
Gigaset C28H handset!
¢ ¢
§Menu§
Settings
§OK§
Press the display key to confirm
reset.
¢
System Reset