Table of Contents
Advertisement
The base station at a glance
9 Redial/Pause key
Open redial list (in idle status) or insert a dial-
ing pause (when editing a number).
10 Page key
Page handsets (press briefly).
Start the registration procedure (press and
hold in idle mode). You will hear a beep.
11 Mute key
Mute/unmute microphone.
12 Intercom/Hold/Conference key
Set up an internal call.
Switch between an external call and internal
party (handset/base station), or transfer a call
during an external call.
Set up a conference call between an external
line and an internal party (handset/base sta-
tion). Press and hold the key in hold-intercom
mode.
13 Line keys
Answer an incoming call for Line 1/Line 2.
Make a call from Line 1/Line 2.
Start a second call from Line 2 while telephon-
ing from Line 1 (see page 26ff.).
LED status indicator:
– Flashes rapidly when the respective line is
receiving an incoming call.
– Flashes slowly when a handset is off the
hook on the respective line.
– Flashes very slowly when the respective
line is on hold on the base station.
– Is on when the base station is in talk mode.
14 End Call key
End call, cancel function, return to idle status.
15 Talk/Flash key
Answer or start a call.
Add a flash (in the directory)
Send FLASH (when off the hook).
4
Please remember:
u
If the answering machine is being oper-
ated from a handset, or if it is recording a
message, you cannot operate it from the
base station.
u
If the start/stop key flashes although the
answering machine is switched off, it
means that there is still at least one new
message that has not been played back.
Advertisement
Table of Contents
