Table of Contents
Advertisement
E/M (English/Metric): On the base DIC,
press to choose English or Metric units.
On uplevel DICs, press the (Option)
button until UNITS appears. Press the
(Set/Reset) button to choose English
or Metric units.
(Set/Reset) (if equipped): Press to
set/reset certain functions and to turn
off/acknowledge DIC messages.
(Gauges) (if equipped): Press to dis-
play battery and oil life. To reset the Oil
Life System after an oil change, press
and hold the
button while OIL LIFE
is displayed until it shows 100%.
(Fuel) (if equipped): Press to display
fuel range and average economy.
(Option) (if equipped): Press to dis-
play English/Metric units, language,
personalization, compass zone and
compass calibration.
(Traction Control) (if equipped):
Press to turn traction control on or off.
(Hazard): Press to turn the hazard
warning flashers on or off.
Personalizing the DIC (if equipped)
Uplevel DICs can memorize selected
personalized settings for up to two
drivers. (Some features are limited to a
single setting.)
1. Place the vehicle in Park (P) and turn
on the ignition.
2. Press the (Option) button until
PERSONAL PROGRAM is
displayed.
3. Press the
(Set/Reset) button
to display instructions.
4. Press the button to display
programmable features.
5. Press the
button to change the
setting of each feature.
Your ignition key identifies you to the
vehicle. Two keys can be programmed
for certain features that correspond to
each driver. To personalize a key:
1. From the Personal Program menu,
press the (Option) button until
PERSONALIZE KEY is displayed.
2. Press the
(Set/Reset) button until
YES is displayed.
3. Press the button.
Personalization Features include:
Delayed Locking — Delays locking
of the vehicle doors for up to five
seconds after the last door is closed.
Two chimes will sound when the power
door lock switch or the Lock button on
the Remote Keyless Entry transmitter
is pressed when a door is open. To
program:
1. From the Personal Program menu,
press the (Option) button until
DELAYED LOCKING is displayed.
2. Press the
(Set/Reset) button until
ON or OFF appears.
3. Press the button to select it.
The ignition key must be removed for
the feature to work after programming.
Key Fob Feedback — Choose from Off
(no feedback), Lights (exterior lights
flash) or Lights and Horn when you
press the Remote Keyless Entry trans-
mitter (key fob) Lock button. To program:
1. From the Personal Program menu,
press the (Option) button until
FOB LOCK FEEDBACK is displayed.
2. Press the
(Set/Reset) button until
the desired setting is displayed.
3. Press the button to save the
setting.
5
Advertisement
Table of Contents
