Remote Controller Operation Manual; Wire Remote Controller Introduce - Hisense AMD-09UX4SJD User Manual

1. r
Wire emote controller introuce:
Wireless remoter receiver
ON/OFF button
MODE select button
TIMER/SLEEP button
1 . Room temperature sensor:
A temperature sensor inside the remote control switch is set to sense room temperature, and the temperature
will be sent to indoor unit. When do not connect the remote control switch, indoor unit will switch to the
temperature sensor which is built into indoor unit.
2 . Wireless remoter receiver:
by this receiver, you can use a additional wireless remoter switch to control indoor unit.
3 . ON/OFF button:
press this button to turn on or turn off the unit.
4 . MODE select button:
Press this button to select COOLING, DEHUMIDIFICATION, FAN or HEATING mode.
COOLING mode, the air conditioner makes the room cool.
DEHUMIDIFICATION mode, the air conditioner reduces the humidity in the room.
FAN mode, the air conditioner makes the room's temperature suitable, providing the soft air flow.
HEATING mode, The air conditioner makes the room warm.
5 . TIMER/SLEEP button:
Press this button to active sleep mode, and
Press this button for 3 seconds to active timer function, Press for 3 seconds again to cancel timer function.
To timer function Pls. refer to 2.3
6 . FAN speed button:
Press this button to change current fan speed. You can select
" "
speed),
7 . TEMP Setting button:
Press the couple of button to set room temperature you want, when you press SET TEMPERATURE sign
will appear in LCD, press
setting temperature.
ROOM TEMP
(medium fan speed), and
" "
button to reduce setting temperature, and press

Remote controller operation manual

C
" "
will appear in LCD. Press again to cancel sleep function.
"
AUTO
" "
(high fan speed) by each press.
4
LCD screen
TEMP. setting button
FAN speed/FLAP button
Room temperature sensor
"
(auto fan speed),
"
" "
" "
(low fan
"
button to increase