Smart Mode; Clock Button - Hisense AMD-09UX4SJD User Manual

. .

SMART mode

4 3 3
Press the SMART button, the unit enters SMART mode(fuzzy logic operation) directly regardless of
the unit is on or off. In this mode, temperature and fan speed are automatically set based on the
actual room temperature.
Operation mode and temperature are determined by indoor temperature
Heat pump models
Indoor temperature-Set temperature
-3℃≤△T≤+3℃
Cooling only models
Indoor temperature-Set temperature
SMART button is ineffective in SUPER mode.
Note: Temperature, airflow and direction are controlled automatically in SMART mode.
However, a decrease or rise of up to 7 ℃ can be set with the remote controller if you still
.
feel uncomfortable
Your feeling
Uncomfortable
because of
unsuitable air
flow volume.
Uncomfortable
because of
unsuitable flow
direction.
. .
4 3 4

CLOCK button

You can adjust the real time by pressing CLOCK button, then
using and
CLOCK button again the real time is set.
(invalid for this model)
<-3℃
>+3℃
≤+3℃
>+3℃
What you can do in SMART mode
button
Indoor fan speed alternates among
FAN
High, Medium and Low each time this
button is pressed.
Press it once, the vertical adjustment
louver swings to change vertical airflow
direction. Press it again, swings stops.
buttons to get the correct time, press
remote controller operation manual
Operation mode
HEATING
FAN ONLY
COOLING
Operation mode
FAN ONLY
COOLING
adjustment procedure
27
FAN
MODE