Operation - Wolfgang Puck BQBC0010 Use And Care Manual

Operation

Assembly/Removal of Chopping Blades
1
Carefully remove the plastic cover from the Chopping Blades.
IMPORTANT: Use caution when handling the Chopping Blades as they
are extremely sharp. Always hold the Chopping Blade Assembly by
the shaft, not the blades themselves.
2 Place the Chopper Bowl on a clean, dry, level surface.
3 Hold the Lower Chopper Blades by the shaft and place it over the
spindle inside the Chopper Bowl.
4 Carefully press down the Upper Chopper Blades over the shaft until it
is tightly nested over the Lower Chopper Blades.
Warning: To reduce the risk of injury, always assemble the blades
inside the Chopper bowl as describe above.
5
Always ensure the Motor Housing is unplugged before adding or
removing parts.
6 To disassemble the Chopping Blade Assembly, carefully lift the
Upper Chopper Blade off the shaft. Always hold the Chopping Blade
Assembly by the shaft, not the blades themselves.
Chopping
1 Assemble blades as described above then add food to be processed
to the Chopper Bowl.
2 Place the Chopper Bowl Lid on the Chopper Bowl.
3
Place the Motor Housing onto the Chopper Bowl Lid.
4
Plug the power cord into a 120V AC power outlet.
5
Press down the desired speed button or pulse for short bursts. Avoid
over processing the ingredients.
6 Unplug after use then remove the Motor Housing and Chopper Bowl
Lid.
7 Carefully remove the Chopping Blade Assembly as described above.
8 Remove the processed food from the Chopper Bowl.
8
Care and Cleaning
• Ensure that the unit is unplugged from the electrical outlet before
cleaning.
• Wipe the Motor Housing with a damp cloth. Dry thoroughly. Do not
use any abrasive cleaners or scouring pads on the Motor Housing as
this will damage the finish.
• Wash the Chopper bowl, Chopper Bowl Lid and both Chopping Blades
(except Motor Housing) in warm water using a mild detergent (or see
dishwasher instructions below).
IMPORTANT: Use caution when handling the Chopping Blades as they
are extremely sharp. Dry each part thoroughly before use.
Dishwasher Use
All plastic components deteriorate through the prolonged use of
a dishwasher for cleaning. However all parts of your processor are
tolerant to dishwasher use (excluding the Motor Housing). If using the
dishwasher, place parts only on the top rack. The Motor Housing can
be wiped clean with a damp cloth and then dried thoroughly. Never
immerse the Motor Housing in water or any other liquid.
Chopper Chart
Meat
Herbs
Nuts, Almonds
Cheese
Bread
Onions
Soft fruit
9
Chopper Bowl
14 oz
5 oz
10.5 oz
10.5 oz
9 oz
10.5 oz
14 oz