Cisco 6500 Series Software Configuration Manual page 526

Hide thumbs Also See for 6500 Series:

Table of Contents

Configuring SNMP IfIndex Persistence

Configuration Examples

Clearing SNMP IfIndex Persistence Configuration from a Specific Interface Example

In the following example, any previous setting for SNMP ifIndex persistence on Ethernet interface 3/1

is removed from the configuration. If SNMP ifIndex persistence is globally enabled, SNMP ifIndex

persistence will be enabled for Ethernet interface 3/1. If SNMP ifIndex persistence is globally disabled,

SNMP ifIndex persistence will be disabled for Ethernet interface 3/1.

router(config)# interface ethernet 3/1

router(config-if)# snmp ifindex clear

router(config-if)# exit

Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E

Troubleshooting