Troubleshooting Ipx Mls - Cisco 6500 Series Software Configuration Manual

Troubleshooting IPX MLS

Troubleshooting IPX MLS
Table 20-2
Table 20-2 IPX MLS Debug Commands
Command
[no] debug l3-mgr events
[no] debug l3-mgr packets
[no] debug l3-mgr global
[no] debug l3-mgr all
[no] debug mls ipx
[no] debug mls locator
[no] debug mls all
To configure the debug commands that you can use to troubleshoot IPX MLS problems, perform this task:
Command
Router(config)# debug mls {ipx {all | error | events
| messages} | rp {all | error| events | ip | ipx |
locator | packets | verbose}}
Router(config)# {no | undebug} mls {all | ipx {all |
error | events | messages} | rp {all | error| events
| ipx | locator | packets | verbose}}
This example displays how to configure all IPX debugging:
Router# debug mls ipx all
mls ip all debugging is on
Router#
Note The show tech-support command displays switch system information. Use application-specific
commands to get more information about particular applications.
Table 20-3
SCP that runs over the Ethernet out-of-band channel (EOBC).
Table 20-3 SCP Debug Commands
Command
[no] debug scp async
[no] debug scp data
[no] debug scp errors
[no] debug scp packets
[no] debug scp timeouts
[no] debug scp all
Catalyst 6500 Series Switch Cisco IOS Software Configuration Guide—Release 12.1 E
20-14
describes debug commands that you can use to troubleshoot IPX MLS problems.
Description
Displays Layer 3 manager-related events.
Displays Layer 3 manager packets.
Displays bug trace of IP global purge events.
Turns on all Layer 3 manager debugging messages.
Turns on IPX-related events for MLS, including route purging and
changes of access lists and flow masks.
Identifies which switch is switching a particular flow by using MLS
explorer packets.
Turns on all MLS debugging events.
describes the Serial Control Protocol (SCP)-related debug commands to troubleshoot the
Chapter 20 Configuring IPX Unicast Layer 3 Switching on Supervisor Engine 1
Purpose
Configures IPX MLS debugging.
Disables MLS debugging.
Description
Displays trace for async data in and out of the SCP system.
Displays packet data trace.
Displays errors and warnings in SCP.
Displays packet data in and out of the SCP system.
Reports timeouts.
Turns on all SCP debugging messages.
78-14099-04