Installing The Display Assembly; Removing The Display Bezel - Dell Latitude E5450 Owner's Manual

Installing the Display Assembly

1. Place the display assembly to align with the screw holders on the computer.
2. Route the WWAN, WLAN, and display cables through their routing channels.
3. Tighten the screws to secure the display assembly to the computer.
4. Connect the WWAN and WLAN cables to their connectors.
5. Connect the display cable to the system board, place the display-cable bracket over the connector,
and tighten the screw to secure the display cable to the computer.
6. Install the:
a. display-hinge brackets
b. palmrest
c. keyboard
d. keyboard trim
e. battery
f. base cover
7. Follow the procedures in

Removing the Display Bezel

1. Follow the procedures in
2. Pry the edges to release the display bezel from the display assembly.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
29