15.
wireless-status light
17.
hard-drive activity light
19.
speakers
21.
smart-card reader (optional)
23.
security-cable slot
25.
Service-Tag label
Removing the SD Card
1.
Follow the procedures in Before Working Inside Your Computer.
2.
Press in on the SD card to release it from the computer.
3.
Slide the SD card out of the computer.
Installing the SD Card
1.
Push the SD card into its slot until it clicks into place.
2.
Follow the procedures in After Working Inside Your Computer.
Removing the Base Cover
1.
Follow the procedures in
2.
Perform the following steps to remove the base cover from the computer:
a. Remove the screws that secure the base cover to the computer.
b. Lift the base cover from its edge and remove the base cover from the computer.
8
Before Working Inside Your
16.
battery-status light
18.
power-status light
20.
touchpad
22.
headset connector
24.
dock connector (optional)
Computer.