Installing The System Board; Removing The Heatsink Assembly - Dell Latitude E5450 Owner's Manual

Installing the System Board

1. Place the system board to align with the screw holders on the computer.
2. Tighten the screws to secure the system board to the computer.
3. Connect the speaker cable to its connector on the system and route the cable through its routing
channels.
4. Install the:
a. display assembly
b. display-hinge brackets
c. palmrest
d. keyboard
e. keyboard trim
f. hard-drive assembly
g. memory
h. battery
i. base cover
j. SD card
5. Follow the procedures in

Removing the Heatsink Assembly

1. Follow the procedures in
2. Remove the:
a. SD card
b. base cover
c. battery
d. hard-drive assembly
e. memory
f. WLAN
38
After Working Inside Your
Before Working Inside Your Computer
Computer.