Changing The Fax Resolution; Adjusting The Darkness Setting - Lexmark X644e User Manual

touch Done. This setting can be especially useful in sending information to fax lines that are
not readily available during certain hours, or when transmission are cheaper.
Note: If the device is powered off when the delayed fax is due to be sent, the fax is sent
the next time the MFP is powered up.
Transmission Log: Prints the transmission log or transmission error log.
Scan Preview: Displays the image before it is included in the fax. When a page is scanned,
the scanning is paused and a preview image appears.
Note: Scan Preview is not supported on all models.
Edge Erase: Eliminates smudges or information around the edges of your document. You
can choose to eliminate an equal area around all four sides of the paper or pick a particular
edge. Edge Erase will erase whatever is within the area selected, leaving nothing printed on
that portion of the paper.

Changing the fax resolution

1
Place the original document in the automatic document feeder facing up, short-edge first.
2
Adjust the paper guides.
3
Touch Fax.
4
Enter the fax number.
5
Touch Options.
6
Touch the button that represents the resolution you want.
7
Touch Fax It.

Adjusting the Darkness setting

1
Place the original document in the automatic document feeder facing up, short-edge first.
2
Adjust the paper guides.
3
Touch Fax.
4
Enter the fax number.
5
Touch Options.
6
Touch the left Darkness arrow to reduce the darkness of the fax, or touch the right Darkness
arrow to increase the darkness of the fax.
7
Touch Fax It.
55