Using The Address Book; Creating Shortcuts - Lexmark X644e User Manual

Using the address book

1
Place the original document in the automatic document feeder facing up, short-edge first.
2
Touch FTP.
3
Touch Search Address Book.
4
Enter name or part of the name you are searching for, and then touch Search.
5
Touch the name that you want to add to the To: field.
6
Touch Send It.

Creating shortcuts

Instead of entering the entire FTP site address on the control panel each time you want to send a
document to an FTP, you can create a permanent FTP destination and assign a shortcut number. A
single shortcut number or a multiple number shortcut can be created. There are two methods for
creating shortcut numbers: from a computer or from the MFP touch screen.
From a computer
1
Enter the IP address of the MFP in the URL field (address bar) of your Web browser. If you do
not know the IP address, see your system support person.
2
Click Configuration (in the left frame of your browser window) and then click Manage
Destinations (in the right frame of your browser window).
Note: A password may be required. If you do not have an ID and password, obtain one
from your system support person.
3
Click FTP Shortcut Setup.
4
Enter the appropriate information into the fields.
5
Assign a shortcut number.
If you enter a number that is already in use, you are prompted to select another number.
6
Click Add.
7
Go to the MFP, and load the original document in the automatic document feeder facing up,
short-edge first.
8
From the numeric keypad, press #, and then enter your shortcut number.
9
Touch Send It.
61