Roland R-88 Owner's Manual page 66

Parameter List
Category Menu item / Effect
SD CARD INFO
Displays information about the SD card.
SAVE SETUP
Backs up the R-88's settings to an SD card or USB flash drive.
LOAD SETUP
MEMORY
Loads settings that were saved to an SD card or USB flash
drive.
USB MEMORY
Copies a project between SD card and USB flash drive.
SD CARD FORMAT
Formats the SD card.
CONTRAST
Adjusts the contrast of the characters in the display.
BACKLIGHT
Adjusts the brightness of the display backlight.
DISPLAY TIMER
Specifies the time after which the display backlight will
be darkened if no operation has been performed. (Units:
seconds)
BUTTON LIGHT
Specifies the brightness of the button lights.
PEAK INDICATOR
Specifies the level at which the PK indicators will light.
BATTERY
Specifies the type of battery that is installed.
EXT POWER
Selects the final voltage of an external power supply.
AUTO OFF
Specifies the time after which the power will turn off if no
operation has been performed. (Units: minutes)
HOLD
Specifies the controls that will be
disabled by the [HOLD] switch.
REC BUTTON FUNCTION
SYSTEM SETUP
Specifies what will happen when you press the [REC] button.
REC STOP BUTTON
Specifies the response speed of the [STOP] button.
By setting this to "HOLD 2 Sec, " it lets you prevent the R-88
from stopping in the event that your hand accidentally
brushes against the [STOP] button.
STOP MODE
Specifies the home screen accessed by pressing the [STOP]
button.
LEVEL KNOB MODE
Specifies the function of the [LEVEL] knobs: adjusting
the input levels during recording, or acting as the mixer's
channel faders.
CTL1 FUNCTION
Specifies the function of the footswitch (CTL1).
CTL2 FUNCTION
Specifies the function of the footswitch (CTL2).
PEAK ALARM
Turns on/off the alarm tone that is sounded when the input
level reaches the peak.
REMAIN ALARM
Turns on/off the alarm tone that is sounded when the SD
card's free space runs low.
BATTERY ALARM
Turns on/off the alarm tone that is sounded when the
battery runs low.
MEDIA SLOW ALARM
Turns on/off the alarm tone that is sounded when data could
not be written to the SD card fast enough.
66
Value (default value: bold)
−
−
−
−
−
1–5–10
1–3–4
OFF, 2 sec, 5 sec, 10 sec, 20 sec
AUTO, DIM, BRIGHT
-24dB–0dB
ALKALINE, Ni-MH
9.0V, 9.5V, 10.0V, 10.5V, 11.0V, 11.5V, 12.0V
OFF, 5 min, 10 min, 30 min, 60 min, 120 min, 240 min
LEVEL KNOB Disables operation of the LEVEL knobs.
SENS KNOB Disables operation of the SENS knobs.
Disables operation of the [ ] (REC), [
BUTTON
(PLAY/PAUSE), [ ] (STOP), [
buttons, and [SLATE] switch.
TOUCH PANEL Disables operation of the touch panel.
Disables knob rotation operations.
MASTER LEVEL
Knob press operations will not be disabled.
REC, REC/MARK
IMMEDIATE, HOLD 2 Sec
REC, REC/PLAY
INPUT, MIXER
STOP, REC, PLAY, FF, REW, REC/STOP,
PLAY/STOP, PLAY(MOMENT), SET MARKER, PREV MARKER, NEXT MARKER
STOP, REC, PLAY, FF, REW, REC/STOP,
PLAY/STOP, PLAY(MOMENT), SET MARKER, PREV MARKER, NEXT MARKER
How the alarm will sound:
". . . . "
How the alarm will sound:
". . . . "
How the alarm will sound:
". . . . "
How the alarm will sound:
"— — — — "
]
] (−), [ ] (+)
ENABLE, DISABLE
OFF, ON
page
–
p. 58
p. 58
p. 59
p. 27
−
−
−
−
−
p. 23
p. 24
p. 25
p. 6
p. 38
−
p. 10
p. 43
p. 42
p. 42
–
–
–
–