Marker - Roland R-88 Owner's Manual

Recording/Playback

Marker

Here's how to assign a marker within the project.
If you've assigned markers, you can quickly move to a previously
marked location during playback.
Assigning a marker during recording
1.
Start recording .
2.
At the moment you want to assign a marker, touch
<MARK> .
Using the [ ] (REC) button to assign a marker
If you've set REC BUTTON FUNCTION to "REC/MARK, " you
can also assign a marker by pressing the [ ] (REC) button.
A marker will also be assigned if you turn on the slate mic
during recording.
1.
Choose [MENU] <SYSTEM SETUP>
Ú
FUNCTION> .
<REC BUTTON FUNCTION> is located on page 3/6. Touch
to access 3/6.
2.
Touch <REC/MARK> .
38
Assigning a marker to a previously recorded project
1.
2.
3.
<REC BUTTON
Ú
Moving to a marker
Deleting a marker
In the playback home screen (p . 10), touch <MARK> .
Use the [ ] button, [ ] button, [
[ ] button to play, fast-forward, or fast-rewind to find
the location at which you want to assign a marker .
When you've found the location at which you want to
assign a marker, touch <SET> .
Marker indication
(number of markers passed/number
of markers in the project)
The number of markers will be shown. Markers are numbered
sequentially starting at the beginning of the project.
A maximum of 99 markers can be assigned. Repeat steps 2 and 3 to
assign markers at the desired locations.
Touch < > to move to the marker that precedes the current
location. Touch < > to move to the marker that follows the current
location.
Touch <CLR> to delete a marker you've assigned. Markers will be
deleted starting with the marker that precedes the current location.
] button, and