Roland R-88 Owner's Manual page 11

Buttons in the home screen
By touching the buttons in the bottom of the record/stop or playback home screens, you can edit the various input settings, specify how the level
meters will be displayed, and assign markers within the project.
During recording
During playback
<INPUT> button
Switch each input on/off,
specify low cut, and make limiter
settings (p. 28).
<METER ZOOM> button
Magnifies the 20 dB region of the
level meter display .
Progress Bar
Indicated the playback position.
By touching this you can jump to the desired playback position.
<A-B> button
Repeatedly play back the
specified region (AB repeat)
within the project(p. 40).
<SENS> button
Check the sensitivity setting
of each input. The value of the
sensitivity setting is adjusted
using the [SENS] knobs
13
(p. 6) on the front panel.
<MARK> button (during
recording)
Assigns a marker within the
project (p. 38). By touching this
button during recording, you
can assign a marker to the
current location.
< > button
By touching and sliding this
button to the left or right, you
can rewind or fast-forward the
project. Rewind or fast-forward
will become faster as you move
the button farther from the
center.
<MARK> button
Touch this button to access the
Marker screen (p. 38).
Overview
11