Roland R-88 Owner's Manual page 22

Quick Guide
EQ Settings
Here's how to make EQ settings.
1.
Touch .
2.
Touch <EQ> of the channel whose setting you want to
turn on/off .
Output Level Settings
Here's how to adjust the output level to achieve the
appropriate level when the R-88 is connected to an
external device.
1.
Activate the slate tone (p . 50) .
* The slate tone cannot be output when the home screen is in
playback mode.
2.
Adjust the [MASTER LEVEL] knob so that the MASTER
LEVEL meter (MST) is at the appropriate level .
3.
Make the appropriate adjustments to the input level of
the connected device .
22
page p . 46
Slide the switch to the
TONE position and hold
it there for two seconds.
MASTER LEVEL
Meter
3.
Touch <PRM> .
4.
Touch the slider for a parameter, and drag it left or right
to adjust its value .
To make fine adjustments, use the [
button (p. 45).
Recording a Two-channel Mix
You can record a separate two-channel stereo mix
project simultaneously while recording a multitrack
project.
1.
Choose [MENU] <REC/PLAY SETUP>
Ú
2.
Touch <ON> .
page 45
] (−) button or [ ] (+)
page 35
<MIX REC> .
Ú