Withdrawing Driver Card(S) - VDO DTCO 1381 Operating Instructions Company & Driver

Withdrawing driver card(s)

Withdrawing driver card(s)
In principle, the driver card can
remain in the card slot at the end of
the work shift – please enter the
activity " ".

However, when the driver or
vehicle is changed, the driver card
should generally be withdrawn from
4
the card slot.
 Refer to "Driver / vehicle change
during operation" on page 40.
You can withdraw the driver card
from the card slot only when the
vehicle is not moving!
Driver card request
38
1. Turn on the vehicle's ignition.
(Required only for ADR variant *.)
2. Enter the corresponding activity; for
example, at the end of the work shift
to " ".

3. Press the ejection button
slot 1 or card slot 2. The subsequent
procedure is menu-guided,
 see page 39.
The ejection from card slot 2 is
blocked if the printer drawer is open!
This will be indicated by the
following operational note.
 drawer open
As soon as you close the printer drawer,
the ejection will be started.
Card withdrawal during manual entry
1. Press the corresponding ejection but-
ton .
2. Select and acknowledge the following
queries with "No".
for card
1M confirm
entry?
1M entry
addition?
3. Continue,
The manual entry is aborted, the
DTCO 1381 saves the activity "
unknown period.
xx
4. Operational mode
no
no
 see page 39.
" for the
?
DTCO 1381