9. Pictograms and printout samples
Data record purpose during events or faults
For each established event or each
established fault, the DTCO 1381 will
register and save the data according to the
specified rules.
(
1)
F
/12345678901234 5 6
B
/22335578901234 1 2
------------------------
4 15.10.2013 11:10
1
( 45)
DK /45678901234567 7 8
F
/12345678901234 5 6
2
(1) Data record purpose
(2) Number of similar events on this day
The data record purpose (1) indicates why
the event or fault was recorded. Events of
the same type appearing several times on
this day are displayed at pos. (2).
© Continental Automotive GmbH
Coding of data record purpose
The following overview shows the events
and faults arranged according to error type
(cause) and the assignment of the data
record purpose:
00h01
Events
Picto / reason
00h30
Cards conflict
!
Driving without valid
!
card
Insertion while driving
!
Card not closed
!
Over-speeding
Power interruption
!
Sensor fault
!
Motion conflict
!
Security breach
!
Time overlap
!
Card invalid
!
Purpose
2)
0
1 / 2 / 7
2)
3
0
2)
4 / 5 / 6
1 / 2 / 7
1 / 2 / 7
2)
1 / 2
0
1)
–
3)
–
Data record purpose during events or faults
Faults
Picto / reason
Card fault
x
Internal fault
x
Printer fault
x
Display fault
x
Download fault
x
Independent motion
x
2)
signal missing
(IMS = Independent
Motion Signal)
1)
This event will be saved only on the
driver card.
2)
This event / fault will only be saved in the
DTCO 1381.
3)
The DTCO 1381 will not save this event.
Purpose
0
0 / 6
0 / 6
0 / 6
0 / 6
0 / 6
9
105