Setting Activities; Manual Setting; Automatic Setting; Automatic Setting After Ignition On/Off - VDO DTCO 1381 Operating Instructions Company & Driver

4. Operational mode

Setting activities

= Driving time (automatic when driving)

= Other work time

= Availability (waiting time, co-driver

time, driver 2 sleeper-cab time during
a journey)
= Break times and rest periods


Manual setting

The activities may be set only if the
vehicle is stationary!
1
Driver 1
Setting activitiy
1. Driver 1 presses the button
The standard display (a) appears.
© Continental Automotive GmbH
2. Continue pressing the button until the
desired activity (
display (1). After aprox. 5 seconds, the
previous display appears.
3. Driver 2 presses the button

Automatic setting

The DTCO 1381 switches automatically to
the following activities:
for ...
Driving
Vehicle stop
At the end of a shift or at the start
of a break, always set the activity
to " ". This will ensure that the

VDO Counter * provides an
accurate calculation.
Driver 2
,
) appears in the
  
After ignition on/off, the DTCO 1381 can be
configured to switch to a defined activity; for
.
example "
The activity (1) and/or (2) which changes
automatically on the basis of ignition on or
off, appears in the standard display (a) and
flashes for approx. 5 seconds. Then, the
previous display will appear again.
Driver 1 Driver 2
 
 
Flashing of the activity(ies) in the standard
display (a)
Setting activities
Automatic setting after ignition
on/off *
".

18:01  0km/h
 
1  123456.7km 
As necessary, change the set
activity according to your current
task.
4
2

35