Stamina Brenda Dygraf's Fitrider Owner's Manual page 9

ASSEMBLY INSTRUCTIONS
STEP 3
Position the LEG ARM(34) at the front of the MAIN FRAME(11), then insert the UPRIGHTS(30) into the MAIN
FRAME(11) and secure with BUTTON HEAD BOLTS(M8x1.25x16mm)(21) and ARC WASHERS(M8)(22).
STEP 4
Attach the LINKAGE(19) to the U bracket on the FRONT SEAT SUPPORT(15) with CARRIAGE
BOLT(M8x1.25x45.5mm)(17) and NYLOCK NUT(M8x1.25)(5).
STEP 5
NOTE: The RIGHT PEDAL(29) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(29)
has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(28) has L
stamped on the end of the pedal shaft. The LEFT PEDAL(28) has left hand threads and is
tightened by turning counterclockwise.
Thread the RIGHT PEDAL(29) into the right side of the LEG ARM(34) as shown. Tighten the pedal
securely. The shoulder of the shaft of the RIGHT PEDAL(29) should be in contact with the LEG ARM(34)
when securely tightened. Repeat on the left side to attach the LEFT PEDAL(28) to the left side of the
LEG ARM(34).
FRONT
Shoulder
Shoulder
9
BACK