Make a note of this data 4. Technical data in your operating instructions and always refer to it when 5. Safety precautions making an enquiry to your Hilti representative or service 6. Before use department. 7. Operation 8.
2. Description The charger is designed for charging Hilti batteries with Items supplied a nominal voltage of 7.2 – 36 volts (C 7/36-ACS charg- – C 7/24 standard charger er) or 7.2 – 24 volts (C 7/24 charger). – C 7/36-ACS top charger –...
5.2 Correct use 5.4.1 Electrical hazards The appliance is designed to charge Hilti batteries with Protect yourself from electric shocks. Avoid body con- a nominal voltage of 7.2 – 36 volts (C 7/36-ACS charg- tact with earthed objects, e.g. pipes and radiators.
Insert the battery in the appropriate compartment or Corrosive liquids may leak from defective batteries. Avoid interface, depending on the type of Hilti battery to be contact with such liquids. charged. Please use the Hilti CA 7/36 adaptor when charging 7.2 Indicators...
Most of the materials from which Hilti appliances are manufactured can be recycled. The materials must be cor- rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking back your old appliances for recycling.
EN 60335-2-29, EN 55014-1, EN 55014-2, EN 61000- 3-2, EN 61000-3-3. The C 7/36-ACS also complies with the following stan- dards or standardization documents: 1999/5/EG, EN 300330, EN 301489. Hilti Corporation Ronald Fehlmann Dr. Heinz-Joachim Schneider BU Leiter Cutting and Sanding BA Leiter Light Duty Systems...