Error Conditions - Lexmark J110 Appletalk Manual

Printing
Print materials
Supplies
Troubleshooting
Administration

Error conditions

What shows on the Description
four indicator lights
binary 12 (for 0.25 sec), Serious failure.
binary 3 (for 0.25 sec), The print server is
unable to recover.
repeat continuously.
binary 15 (for 0.25 sec), POST error
binary x (for 0.25 sec),
repeat continuously.
where x could be 0, 1,
2, 3, 4, 5, 6, 7, 8, or 9
www.lexmark.com
AppleTalk and MarkNet print servers
Cause and solution
Flawed firmware in print server or power
interruption during flash operation.
Call Customer Support.
Power-on self test error. During start-up, a
hardware failure was detected on the print
server.
1 Reset the print server.
2 If the problem reoccurs, call Customer
Lexmark J110
Support.
10