Print Is Too Light - Lexmark E260d Series User Manual

C
HECK THE DARKNESS
The Toner Darkness setting is too dark, the Brightness setting is too dark, or the Contrast setting is too high.
•
From Print Properties, change these settings.
Note: This solution applies to Windows users only.
•
From the Quality menu, change these settings.
T
HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
C
HECK THE PAPER
Avoid textured paper with rough finishes.
C P T
HECK THE APER
Make sure the Paper Type setting matches the paper loaded in the tray.
T
HE TONER CARTRIDGE MAY BE DEFECTIVE
Replace the toner cartridge.

Print is too light

These are possible solutions. Try one or more of the following:
C
HECK THE DARKNESS
The Toner Darkness setting is too light, the Brightness setting is too light, or the Contrast setting is too low.
•
From Print Properties, change these settings.
Note: This solution applies to Windows users only.
•
From the Quality menu, change these settings.
T
HE PAPER MAY HAVE ABSORBED MOISTURE DUE TO HIGH HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
, ,
BRIGHTNESS AND CONTRAST SETTINGS
YPE SETTING
, ,
BRIGHTNESS AND CONTRAST SETTINGS
Troubleshooting
118