Standard Media Exit Shift Assembly Removal; Standard Media Exit Bin Full Actuator Removal - Lexmark X945e MFP 7510 series Service Manual

7510

Standard media exit shift assembly removal

1. Remove the rear cover assembly. See
Warning: Ensure that the rear left middle cover is removed before removing the rear left upper cover, or
damage will occur.
2. Remove the rear left middle cover. See
3. Remove the rear left upper cover. See
4. Disconnect the two connectors from the standard media exit shift assembly (A).
5. Remove the four screws securing the standard media exit shift assembly (A) to the machine.
6. Remove the standard media exit shift assembly (A) from the machine.

Standard media exit bin full actuator removal

1. Remove the rear cover assembly. See
Warning: Ensure that the rear left middle cover is removed before removing the rear left upper cover, or
damage will occur.
2. Remove the rear left middle cover. See
3. Remove the rear left upper cover. See
4. Remove the screw securing the standard exit top cover (A) to the machine.
5. Gently lift the standard exit top cover (A) from the machine.
6. Remove the standard exit top cover (A) from the machine.
7. Remove the screw securing the bracket (B) to the machine.
8. Remove the bracket (B).
4-28
Service Manual
"Rear cover assembly removal" on page
"Rear left middle cover removal" on page
"Rear left upper cover removal" on page
Connectors
A
"Rear cover assembly removal" on page
"Rear left middle cover removal" on page
"Rear left upper cover removal" on page
4-5.
4-6.
4-7.
4-5.
4-6.
4-7.
Previous
Next
Go Back