Dodge Caliber 2012 Owner's Manual page 83

vehicle's seat belt for the outboard position, but you must
use the vehicle's seat belt at the center position. If your
child restraints are not LATCH-compatible, you can only
install the child restraints using the vehicle's seat belts.
Please refer to "Installing The Child Restraint System" for
typical installation instructions.
WARNING!
You should never install LATCH-compatible child
seats so that two seats share a common anchorage. If
installing seats in adjacent seating positions, or if
your child restraints are not LATCH-compatible, in-
stall the restraints using the vehicle's seat belts.
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81
Rear Seat LATCH Anchorages
Installing The LATCH – Compatible Child
Restraint System
We urge you to carefully follow the directions of the
manufacturer when installing your child restraint. Not all
child restraint systems will be installed as described here.
I n f o r m a t i o n P r o v i d e d b y :
2