Oil Change Required - If Equipped - Dodge Caliber 2012 Owner's Manual

Hide thumbs Also See for Caliber 2012:
Table of Contents

Advertisement

• Key In Ignition
• Low Tire
• Service TPM System
• Low Tire Pressure Display for Premium TPM System
• Oil Change Required
• Remote Start Aborted — Door Ajar
• Remote Start Aborted — Hood Ajar
• Remote Start Aborted — Trunk Ajar
• Remote Start Aborted — Fuel Low
• Remote Start Aborted — System Fault
Oil Change Required — If Equipped
Your vehicle is equipped with an engine oil change
indicator system. The Oil Change Required message
will display in the EVIC when the Key is turned to RUN
UNDERSTANDING YOUR INSTRUMENT PANEL 217
and a single chime sounds to indicate the next scheduled
oil change interval. The engine oil change indicator
system is duty cycle based, which means the engine oil
change interval may fluctuate dependent upon your
personal driving style.
Unless reset, this message will continue to display each
time you turn the ignition switch to the ON/RUN
position. To turn off the message temporarily, press and
release the EVIC button on the instrument cluster. To
reset the oil change indicator system (after performing
the scheduled maintenance), refer to the following pro-
cedure.
1. Turn the ignition switch to the ON position (do not
start the engine.)
2. Fully depress the accelerator pedal slowly three times
within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
I n f o r m a t i o n P r o v i d e d b y :
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents