Preliminary Information; Product Safety; Notices - Metrologic MS6520 Service Manual

1 PRELIMINARY INFORMATION

1.1 Product Safety

1.1.1 Notices

Notice
This equipment has been tested and found to comply with limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which
case the user will be required to correct the interference at his own expense. Any unauthorized
changes or modifications to this equipment could void the users authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Notice
This Class A digital apparatus complies with Canadian ICES-003.
Remarque
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Caution
Use of controls or adjustments or performance of procedures other than those specified herein may
result in hazardous laser light exposure. Under no circumstances should the customer attempt to
service the laser scanner. Never attempt to look at the laser beam, even if the scanner appears to be
nonfunctional. Never open the scanner in an attempt to look into the device. Doing so could result
in hazardous laser light exposure. The use of optical instruments with the laser equipment will
increase eye hazard.
Atención
La modificación de los procedimientos, o la utilización de controles o ajustes distintos de los
especificados aquí, pueden provocar una luz de láser peligrosa. Bajo ninguna circunstancia el
usuario deberá realizar el mantenimiento del láser del escáner. Ni intentar mirar al haz del láser
incluso cuando este no esté operativo. Tampoco deberá abrir el escáner para examinar el aparato. El
hacerlo puede conllevar una exposición peligrosa a la luz de láser. El uso de instrumentos ópticos
con el equipo láser puede incrementar el riesgo para la vista.
1-1