AMX MVP-7500 Operation/Reference Manual page 51

6. Click on the G4 panel name link associated with the target panel. A secondary web browser window
appears on the screen (FIG. 34).
FIG. 34 Web Control VNC installation and Password entry screens
7. Click Yes from the Security Alert popup window to agree to the installation of the G4 WebControl
application on your computer. This application contains the necessary Active X and VNC client
applications necessary to properly view and control the panel pages from your computer.
The G4 Web Control application is sent by the panel to the computer that is used for
communication. Once the application is installed, this popup will no longer appear.
This popup will only appear if you are connecting to the target panel using a different
computer.
8. In some cases, you might get a Connection Details dialog (FIG. 35) requesting a VNC Server IP
Address. This is the IP Address not the IP of the Master but of the target touch panel. Depending on
which method of communication you are using, it can be found in either the:
FIG. 35 Connection Details dialog
9. If a WebControl password was setup on the G4 WebControl page, a G4 Authentication Session
password dialog box appears on the screen within the secondary browser window.
MVP-7500/8400 Modero Viewpoint Wireless Touch Panels
Wired Ethernet - System Settings > IP Settings section within the IP Address field.
Wireless - Wireless Settings > IP Settings section within the IP Address field.
If you do not get this field continue to step 9.
Configuring Communications
IP Address of touch panel
- obtained from IP Settings section of
the Wireless Settings page (MVP)
41