Phone Installation; Connecting The Base; Setting Up The Handset - SAGEMCOM SIXTY User Manual

PHONE INSTALLATION

C
ONNECTING THE BASE
Before making any connections, please
refer to the safety instructions presented
at the beginning of this user guide.
Never force the plugs: they are in different shapes to
avoid connection mistakes.
Power socket
1. On the underside of the base, click the phone jack into
its socket and connect the other end of the cord to the
telephone wall outlet.
2. Connect the end of the power supply cord on the
underside of the base and connect the power adapter
to the mains socket. The phone display is turned on.
3. An information screen presents the current language
used.
4. Select the language using
5. Press Valid..
6. An information screen asks you to choose the country
where you will use your telephone.
7. Select the country using
Valid..
Telephone socket
and keys.
and keys. Press
If you have made a mistake while
choosing the language or the country, you
have the possibility to change them later.
In order to modify the language or the
country, refer to paragraph "Modifying the
language", page 23. In order to modify the
country, refer to paragraph "Modifying the
country", page 27
S
ETTING UP THE HANDSET
The batteries are already inserted in the handset. To put
the handset into use, simply remove the tab by pulling on
it firmly in the direction of the arrow.
The handset emits a double beep to indicate that it has
started and then a second beep to indicate that the
handset is synchronized with the base. From then on,
your handset becomes operative and you can use it to
make calls.
On leaving the factory, the handset is
already registered in the base.
If your handset is not recognized by the
base, then launch a manual registration
(See paragraph
registration mode", page 25.
You can now use your telephone to make and receive
calls.
"Set the base to
11 4