Appendix; Care And Maintenance; Problems - SAGEMCOM SIXTY User Manual

APPENDIX

C M
ARE AND AINTENANCE
Turn off your phone. Use a soft damp cloth to wipe it. Do not use a dry cloth, strong liquid detergents, thinners, alcohol
or any other type of solvent to clean your phone. These products may damage your phone.
P
ROBLEMS
Refer to the table presented below in case of an operational malfunction:

Problems

You are having Contrast too low.
trouble reading or
cannot read the
display when not in
standby mode.
No display on the Power connection unplugged.
base screen.
No tone. The
connected or is incorrectly
connected.
The speaker volume is too low. Increase the speaker volume (refer to paragraph
The phone does not The mute mode is turned on.
ring when a call is
received.
Your party cannot You have turned on the mute
hear you. mode (microphone off).
You obtain a "busy" Incorrect flashing time.
dial tone for each
dialled number.
4
Possible causes
phone jack is not
Remedies
Increase the contrast level (refer to paragraph "Adjusting
the contrast", page 23).
Check the power connection to the phone.
Check the phone cable connection (refer to paragraph
"Connecting the base", page 11).
Make sure you have a dialling tone.
"Receiving a call", page 14).
Turn off the mute mode (refer to paragraph "Activating/
deactivating the silent mode", page 23).
Turn off the mute mode (microphone off) in MENU then
MUTE.
Make sure that the "MUTE MODE" message is not
displayed.
Set the flashing time (refer to paragraph "Modifying the
flash duration", page 26).
Contact your operator to get it to provide you with the right
time.