Line Settings - SAGEMCOM SIXTY User Manual

Line settings

Before changing the settings of the
telephone line, contact your operator to
obtain the parameters for your line.
Modifying the dialling mode
The type of dialling generally used is voice frequency.
It is possible that the exchange to which you are
connected uses pulse dialling.
• Go to SETTINGS / ADVANCED SET.
DIAL.
• Press Valid..
• A screen displays the current status.
- To keep the status, press Valid..
- To modify the status, press
modified on the screen.
• Press Valid.. OK is displayed on the screen.
• Press Return to go back to the previous menu.
The default dialling mode is tone.
26
4
If you connect your telephone to a private automatic
branch exchange or use it in a foreign country, you may
need to modify the flash duration in order to use your
telephone correctly with regard to the following
functionalities: outgoing 2nd call, incoming 2nd call, 3 way
calling.
Contact your service provider to obtain the correct flash
duration and then modify it by doing the following.
• Go to
/ SET LINE /
• Press Valid..
• An information screen presents the current flash
or . The status is
• Select the new duration.
• Press Valid..
• Press
Modifying the flash duration
SETTINGS / ADVANCED SET.
FLASHING.
duration.
- To keep the duration, press Valid..
- To modify the duration, press
OK is displayed on the screen.
Return to go back to the previous menu.
/ SET LINE /
or .