Phone Use; Handset Location; Calling; Receiving A Call - SAGEMCOM SIXTY User Manual

PHONE USE

H
ANDSET LOCATION
Lost your handset? Press the button
the base, behind the keypad. The handset will then ring.
C
ALLING

Receiving a call

• When a call is received, the phone rings.
• The caller's phone number is displayed on the screen
if you have subscribed to the "Caller ID" service.
The caller's name may also be displayed if it is
included in your phone book.
Accepting a call in handset mode
• Pick up the phone handset. You do not need to
press the handset's button.
• Make sure to identify the handset direction by the
dot which identifies the earpiece end. The call time
counter is displayed on the screen.
• To end the call, hang up the handset or press the
handset button.
• A visual and audible signal confirms that the
handset is hung up correctly.
• If the handset is not on the base, you have to press
the handset button to take the call.
14
4
Accepting a call in speakerphone mode
• Press
(without holding the handset). The
the call time counter are displayed on the screen.
on the back of
• To end the call, press
Toggle between handset mode and speaker-
phone mode
• If you are in handset mode, press and hold the
key and then hang up the handset to toggle to
speakerphone mode. Press the
end the call.
• If you are in speakerphone mode:
- If the handset is hung up on the base, lift the
- If the handset is not hung up on the base, press
• To end the call, hang up the handset on the base or
press
to speak in speakerphone mode
again.
phone handset to toggle to handset mode.
the dial tone button to toggle to handset
mode.
.
Use the and
earphone volume
volume. The handset earphone volume or
speakerphone volume can vary from 1
to 5.
symbol and
key again to
keys to vary the
or speakerphone