Phone Installation; Connecting The Base; Setting Up The Handset - SAGEMCOM SIXTY Quick Start Manual

PHONE INSTALLATION

C
ONNECTING THE BASE
Before making any connections, please
refer to the safety instructions presented
at the beginning of this quick start guide.
Never force the plugs: they are differently
shaped to avoid connection mistakes.
Power socket
1. On the underside of the base, click the phone jack into
its socket and connect the other end of the cord to the
telephone wall outlet.
2. Connect the end of the power supply cord on the
underside of the base and connect the power adapter
to the mains socket. The phone display is turned on.
3. An information screen presents the current language
used.
4. Select the language using and  keys.
5. Press Valid..
6. An information screen asks you to choose the country
where you will use your telephone.
7. Select the country using and  keys.
8. Press Valid..
Telephone socket
If you have made a mistake while
choosing the language or the country, you
have the possibility to change them later.
In order to modify the language or the
country, refer to the user guide available
on our web site:
www.sagemcomdigital.co.uk.
S
ETTING UP THE HANDSET
The batteries are already inserted in the handset. To put
the handset into use, simply remove the protective tab by
pulling on it firmly in the direction of the arrow.
The handset emits a double beep to indicate that it has
started and then a second beep to indicate that the
handset is synchronized with the base. From then on,
your handset will be fully operative and you can use it to
make calls.
On leaving the factory, the handset is
already registered to the base.
If your handset is not recognised by the
base, refer to the user guide available on
our web site:
www.sagemcomdigital.co.uk.
You can now use your telephone to make and receive
calls but we recommend that you fully charge the handset
first.
9