Names of parts
(Memory gauge
The memory gauge lights up when you take a still
picture. While the gauge is lit, the camera is storing the
picture on the card. The memory gauge indication
changes as shown below depending on the shooting
status. The indication is not displayed during movie
recording.
Shoot
a
Before shooting
(Gauge is off)
(Battery check
If the remaining battery power is low, the battery check indication changes as
follows when the camera is turned on or while the camera is in use.
e
Lights (green)
(Goes off after a while)
Remaining power level: high Remaining power level: low
14
Shoot
b
One picture taken
(Lit)
f
Blinks (red)
If you intend to use the
camera for a long period of
time, charge the battery as
soon as possible.
Battery check indication
Memory gauge
Shoot
c
Wait
Two or more taken
(Lit)
Wait until the gauge
returns to the status
on the left to take
the next shot.
BATTERY EMPTY
is displayed.
Remaining power level:
exhausted
Charge the battery.
0.0
0.0
1/ 1/200
200
F5.6
F5.6
3264*2448
d
No more pictures
can be taken
(Fully lit)