Page 8
Contents 8 Direct printing (PictBridge) Using the direct printing function ..... . 107 Connecting the camera to a printer ....108 Printing pictures.
Viewing still pictures QUICK VIEW This function lets you play back pictures while the camera is in the shooting mode. This is useful when you want to check shooting results and resume shooting quickly. Functions available in normal playback mode are also available in Quick View.
Page 91
ALL RESET - Saving the camera's settings Functions that All Reset affects and their factory default settings Function Factory default setting Ref. Page AUTO P.71 Monitor DRIVE (for still pictures) P.63 P.66 Shoo ing modes (PROGRAM AUTO) P.41 AUTO P.56 P.59 P.69 DIGITAL ZOOM...
Page 124
Troubleshooting The flash does not fire. Possible cause Corrective action Ref. Page The flash is set to the Select a flash mode other than flash off. P.56 flash off mode. The subject is If you want the flash to fire on a brightly P.56 illuminated.
Troubleshooting The image quality is poor The picture is too bright. Possible cause Corrective action Ref. Page The flash was set to the Select a flash mode other than fill-in flash. P.56 fill-in flash mode. The subject was Adjust the exposure compensation toward P.69 excessively illuminated.
Page 127
Troubleshooting The picture has obscured edge(s). Possible cause Corrective action Ref. Page The lens was partly Hold the camera correctly, keeping your P.30 blocked by your finger or fingers and the strap away from the lens. the strap. The subject was too Check the actual picture area by using the P.44 close.
Troubleshooting Miscellaneous The life of the batteries is short. Possible cause Corrective action Ref. Page The camera is being The battery performance decreases in cold – used in a cold area. areas. Protect the camera from the cold by using a cold protection gear, or by putting it inside your clothes.
Page 137
Specifications Operating environment Temperature : 0°C to 40°C (32°F to 104°F) (operation) -20°C to 60°C (-4°F to 140°F) (storage) Humidity : 30% to 90% (operation)/10% to 90% (storage) Power supply : 1 CR-V3 lithium battery pack, or 2 AA (R6) alkaline batteries or NiMH batteries.
Glossary of terms Sleep Mode A mode designed to save battery life. The camera automatically enters the sleep mode if you do not operate it for a certain ime. To get out of the sleep mode, use any button on the camera (shutter button, arrow pad, etc.). TFT (Thin-Film Transistor) Color Monitor A color monitor constructed using thin-film transistor technology.
Page 142
Index USB connector ... 8 USB connector cover ..8 Viewfinder ....9 Virtual dial .