Loading Paper - Lexmark 2000-Sheet Drawer Optra T User Manual

Loading Paper

16
2000-Sheet Drawer User's Guide
Proper paper loading can prevent paper jams and help to ensure
trouble-free printing.
To avoid paper jams:
•
Do not load print material above the paper capacity mark.
See page 18 to locate the paper capacity mark.
•
Do not fold or crease the paper.
•
Align paper to the back of the drawer.
•
Do not mix paper sizes or weights in the same paper
source.
•
Do not open the loading door or remove any paper while a
job is printing or Busy is displayed on the operator panel.
Note: When loading more than one ream of paper, we recommend
you remove the top and bottom sheet.
Before loading paper in the tray, you should know the
recommended print side of the paper you're using. This information
is usually indicated on the paper package. To load the paper follow
these steps:
1
If you are loading paper for the first time, proceed to step 2
on page 17 now. If not, note the paper size previously
loaded. If you are unsure of the paper size, go to the printer
operator panel and follow these steps:
a
Make sure the printer power is on and the
status message appears on the display.
b
Select
c
Select
d
Select Paper Size.
e
Select Tray x Size (where x represents the tray
number of the 2000-sheet drawer).
If you want to load a paper size different from the one
selected see page 12 for instructions, and then proceed
with step 2 on page 17.
Menus.
.
Paper Menu
Ready