Lexmark 2000-Sheet Drawer Optra T User Manual page 15

8
If you intend to operate your 2000-sheet drawer at 100 -
127V power, you must use the 16 AWG power cord
provided with the unit. Plug the 16 AWG power cord into the
back of the drawer and then into a properly grounded
electrical outlet. Do not use the power cord provided with
the printer; however, you may retain it for possible future
use. For example, if you later decide to detach the current
printer from the 2000-sheet drawer, and use the printer with
other paper options, you should use the original power cord
provided with the printer. The 16 AWg power cord should
always remain with the 2000-sheet drawer.
If you intend to operate your 2000-sheet drawer at 200 -
240V power, use the power cord provided with the printer.
Plug the power cord into the back of the drawer and then
into a properly grounded electrical outlet.
9
2000-Sheet Drawer User's Guide